2 2
I n s t a l l i n g t h e p o w e r a m p l i f i e r
To
�����������
�������
������
�������� | ��� |
�����������
�������
������
��� | �������� |
����� �����
Extremely high sound quality can be achieved using two separate G56/G57 Two-channel Power Amplifiers, one to drive each loudspeaker. The two channels in each G56/G57 Two-channel Power Amplifier are used to drive the LF and HF units in each loudspeaker.
•Switch the BRIDGE MODE switch on both amplifiers to the OFF position.
Important: Remove the links bridging the LF and HF terminals on the back of each loudspeaker.
•Connect the red and black terminals from the LF and HF units on one loudspeaker to the red and black terminals on each channel of one amplifier.
•Likewise, connect the LF and HF units from the other loudspeaker to the red and black terminals on each channel of the other amplifier.
•Connect the left audio output from the preamplifier to both inputs on one amplifier.
•Connect the right audio output from the preamplifier to both inputs on the other amplifier.
