2 3
Tr o u b l e s h o o t i n g
Troubleshooting
We expect you to achieve superb results with the power amplifier. If, however, you encounter any problems, either when installing it, or during operation, please check the following pages for suggested solutions.
If these suggestions fail to cure the problem, please contact your Meridian dealer for further
assistance.
No
•Check that the AC power supply is connected correctly.
•Check that the ON OFF switch on the back panel is in the ON position.
•Check that the fuse on the product’s back panel and the fuse in the unit’s power plug have not blown; see To change the mains fuse, page 24.
The sound has cut out
The G Series power amplifiers include a thermal shutdown, which mutes the output if the amplifier becomes too hot. The Standby LED will also become red.
•Leave the amplifier for a few minutes to cool down; the Standby LED will turn blue.
The amplifier can then be taken out of standby using the front- panel button or the TRIGGER INPUT.
The G Series power amplifiers also include a power circuit breaker to protect the loudspeakers. This is triggered by excessive DC on the input, extreme thermal overload, or if the mains supply is interrupted.
•Check the system for the cause of the cut out.
•Switch off, wait five seconds, then switch on to reset the power.
