3 0 |
|
|
P l a y i n g |
|
|
DV D - V i d e o | More Changing the video controls |
|
d i s c s |
| |
| The G Series DVD players include several video controls to allow | Alternatively press the red • key on the MSR+. |
| you to adjust the video image. The video controls are available for |
|
| video inputs, and the picture position controls are also available for | If you have reprogrammed the MSR+ you may need to press |
| the internal DVD. | Function DVD first. |
| • Press More to display the Video soft key, then press Video. |
|
X= 0 Y= 0
Video ìî
Video
To select the video control
•Press Video or the red • key on the MSR+ to select the required video control.
The following video controls are available:
X=, Y=: Horizontal and vertical picture position.
Film: Film mode detection setting†.
Black: Black level*.
Contrast: Picture contrast*.
Colour: Picture colour*.
Hue: Picture hue (NTSC inputs only)*. * Only for external video sources.
†Normally turned on. Should only be turned off if advised by technical support. 30fps setting may be useful for some older NTSC film material.
ïñ
Left/Right
To adjust the current control
•Press < or > to change the current control; eg horizontal picture position.
Each control can be varied between
The picture position control also uses V and A to alter the vertical position.
óòô öõú
Aspect Ratio
To change the image aspect ratio
With correctly authored DVDs the DVD player automatically selects the correct scaling. For external inputs or incorrectly authored DVDs you can press the green
•key on the MSR+ to cycle through the following options:
4x3: Typical VHS and broadcast TV.
14x9LB: 4x3 picture with black bars top and bottom enclosing a 14x9 image. Typically BBC broadcasts in the UK.
16x9LB: 4x3 picture with black bars top and bottom enclosing a 16x9 image. Typically for films on Laserdisc.
16x9: 16x9 picture filling the image. Often called anamorphic. Typically for external DVD inputs.
Native: Aspect ratio conversion disabled. Image fills display as is.
