Meridian Audio Stereo System ïñ óòô öõú Assign, p r o c e s s i n g More Changing DSP parameters

4 0

D i g i t a l

s u r r o u n d

p r o c e s s i n g More Changing DSP parameters

Each DSP preset provides a series of parameters that you can vary to customise the behaviour of the preset to your specific requirements. For example, most presets provide Balance and Depth to allow you to alter the imaging of the sound field.

For each of the built-in DSP presets these parameters are set to standard values, designed to give the best sound in typical listening conditions and with most source materials. Each time you select

a different DSP preset the parameters are reset to these standard values, even if you have previously altered them. You can also change the DSP preset assigned to a source.

•Press More to display the menu keys.

On the G91 press More to display the Assign soft key. You cannot change the DSP parameters.

Current source DSP parameter Value

�������������������

ìî ïñ óòô öõú Assign

Menu </>

To select the parameter you want to change

•Press < or >, or Function < or > on the MSR+, until the display shows the name of the parameter you want to change.

For example:

������������

Menu V/A

To change the value of the parameter

•Press A or V, or Function A or V on the MSR+, to change the value of the parameter.

As you change the value you will be able to hear the effect on the sound, and the display will show the current value. For example:

������������

After a short delay the display will revert to the normal display of DSP preset and volume.

Assign

To assign a DSP preset to a source

•Listen to the source you want to change.

For example, to change the DSP preset used for multichannel movie sources, play a DVD-Video.

The display will show the DSP preset assigned to that source. For example:

������������

•Press DSP until the display shows the new DSP preset you want to assign. For example:

���������

•Press More until you see Assign.

•Press Assign to save the new assignment.