Kit Assembly
1.Snap the a/c vents into the a/c vent trim panels. (Figure A)
2.Attach the left and right a/c vent trim panels and the climate controls to the main radio housing panel using the provided (10) #8X1/2” Phillips screws and (2) #8X1/4” Pan head screws. (Figure B)
(Figure A)
3.Snap the hazard switch into the main radio housing. (Figure C)
Continued on next page
(Figure C) |
NOTE: #8X1/4” Pan head screws must be installed in the indicated locations.
(Figure B)
5
