Metra Electronics 99-7343 ISO DIN head unit provisions, Double DIN head unit provisions

99-7343

ISO DIN head unit provisions

1.Locate the factory wiring harness in the dash. Metra recommends using the

proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2. Attach the DDIN brackets to the aftermarket radio using the screws supplied with the radio, then secure the assembly to the pocket using the

(4) supplied #8 Truss head screws. (Figure A)

3. Mount the assembly into the sub dash.

4. Reassemble dash in reverse order of disassembly.

(Figure A)

Double DIN head unit provisions

1.Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or

AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2. Attach the Double DIN brackets to the aftermarket radio using the screws supplied with the radio, then mount the unit in the sub dash. (Figure B)

3. Reassemble dash in reverse order of disassembly.

(Figure B)

7