99-7511S KIT ASSEMBLY
DOUBLE DIN/STACKED ISO MOUNT
UNIT(S) PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Attach the filler trim panel to the back of the radio housing at the bottom edge. (Figure A)
2Cut and remove the center bar from the Radio Housing. (Figure B)
A
REAR OF RADIO HOUSING
3 Snap the Double DIN brackets to the inside edge of the Radio Housing.
(Figure C)
B
4Slide the Double DIN or stacked ISO mount unit(s) into the bracket/radio housing assembly and secure to the assembly using the screws supplied with the unit(s). Snap the DDIN Trim Plate onto the front of the Radio Housing. (Figure D)
FILLER TRIM PANEL
Continue to final assembly.
DC
4
