MAZDA 6 2009
1Disconnect the negative battery terminal to prevent an accidental short circuit.
2Unclip and remove the cup holder/parking brake trim panel. (Figure A)
3Unclip and remove the trim panel above the glove box and down the right side of the center console.
(Figure B)
4Unclip and remove the trim panel next to the key switch and down the left side of the center console. (Figure B)
5Unclip and remove the trim panel surrounding the climate controls and the shifter lever. (Figure C)
6Unclip and remove the vent panel above the radio. (Figure D)
7Remove (4) screws securing the factory radio. Unplug and remove the radio.
Continue to kit preparation
D
A
B
C
1