
HONDA ACCORD 2008-10 /  CROSSTOUR 2010
1 Disconnect the negative battery ter-  | A  | 
minal to prevent an accidental short  | 
  | 
circuit. | 
  | 
2 Unclip and remove the trim panel from above the glove box at the right side of the factory radio. (Figure A)
3 Unclip and remove the trim panel at the left side of the factory radio. (Figure B)
B
4 Remove the (2) Phillips screws from the left and right side of the of the factory radio. (Figure C)
5 Unclip and remove the top of the cen- ter console including the cup holders. (Figure D)
6 Remove (2) Phillips screws at the bot-  | 
  | 
tom edge of the pocket assembly.  | 
  | 
(Figure E) | C  | 
7 Remove (2) Phillips screws facing up inside of the pocket below the factory radio. (Figure F)
8 Unclip and remove the pocket assem- bly. (Figure G)
Continue on page 2.
E![]()
 D
1