99-7875/99-7875T KIT PREPARATION
HONDA ACCORD 2008-10 / CROSSTOUR 2010
1Snap the hazard switch/passenger air bag light assembly into the radio housing from front. (Figure A)
2Secure the a/c vents into the radio housing using the factory hardware from rear. (Figure B)
3Secure the climate controls into the radio housing using the factory hard- ware from rear. (Figure C)
4Secure the trim panel onto the radio housing using the factory hardware. (Figure D)
5Attach the clips to the back of the radio housing. (Figure E)
Continue to kit assembly.
A
PAS
SENGER
AIRBAG
B
E
C
D 
3
