DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Cut and remove the center bar from the Radio Housing. (Figure A)
2Snap the Double DIN brackets to the inside edge of the Radio Housing.
(Figure B)
3Slide the Double DIN or stacked ISO mount units into the bracket/radio housing assembly and secure the unit(s) to the assembly using the screws supplied with the unit(s).
(Figure C)
4Snap the Double DIN trim plate onto the front of the Housing/Radio assem- bly. (Figure C)
A
B
Continue to final assembly.
C
6
