TOYOTA TACOMA 2005-2011
ISO DIN HEAD UNIT PROVISION
A
1Attach the corresponding radio housing bracket to the radio housing using the included (4) #8 x 3/8” Phillips truss head screws.(Figure A)
2Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure B)
3Slide the head unit into the radio opening until the side clips engage.
(Figure C) | B |
|
4Snap the ISO Trim Plate into the Radio Housing. (Figure C)
5Secure the radio housing into the dash using the factory hardware.
Continue to Final Assembly.
C
4
