Metra Electronics AW-200GM installation instructions Hummer H2, Remove. Figure D

Dash Disassembly 99-2001, AW-200GM

Hummer H2 2003-2007

1.Open center console and remove (4) 9/32” screws from console box and remove box. (Figure A)

2.Remove (4) phillips screws from hinge on console door inside console and remove door. (Figure B)

3.Loosen (1) T-15 torx on forward facing side of shift lever and pull up to remove (Figure C)

4.Unclip cup holder/shifter trim assembly

and remove. (Figure D) (Figure B)

5.Remove (6) Phillips screws from top of center console.

6.Remove (2) Phillips screws from inside pocket on back of center console, then unclip and remove.

Continued on next page

(Figure C)

(Figure A)

(Figure D)

23