Dash Disassembly 99-2001, AW-200GM

Buick Riviera 1996-1999

1.Unsnap left side panel exposing (1) Phillips screw to remove.

2.Remove (1) Phillips screw and unsnap right side panel to expose (1) Phillips screw beneath panel and remove.

3.Unsnap underside of overhanging dash to unsnap (6) plastic rivets and remove panel.

4.Remove (5) hex head screws now exposed under overhang.

5.Unsnap bottom edge of trim bezel, then while holding overhang up, unsnap and remove trim bezel by removing any necessary harnesses.

6.Remove (3) Phillips screw to remove climate control.

7.Remove (2) Phillips screws to remove rear support and (3) 9/32” hex head screws to remove radio.

Continue to kit assembly

8

Page 8
Image 8
Metra Electronics AW-200GM installation instructions Buick Riviera, Remove 3 Phillips screw to remove climate control