Metra Electronics AW-200GM All vehicles DIN head unit provisions, Secure by bending metal locking

Kit Assembly 99-2001, AW-200GM

All vehicles – DIN head unit provisions

1.	Locate the factory wiring harness in the
	dash. Metra recommends using the
	proper mating adapter from Metra or
	AXXESS. Re-connect the negative
	battery terminal and test the unit for
	proper operation.
	Note:When installing a DIN head unit
	you will need to cut and remove the
	shaft supports in the radio housing.
	(Figure A)
2.	Slide DIN cage into the Radio Housing
		(Figure A)
	and secure by bending metal locking
3.	tabs outward. (Figure B)
	Slide radio into DIN cage. (Figure B)
4.	Reassemble dash in reverse order
	of disassembly.

(Figure B)

31