![](/images/new-backgrounds/1109569/10956957x1.webp)
Repeater Port
To configure repeater ports, first select the group (1 – 6) and select Submit to load the configurations for the selected group. Next select the port of the selected group that is to be configured. Then configure the items listed below and select Save to update the new configuration. Repeat for each port of each group.
Repeater Port Control
Port Number | 1 – 12/24 |
| |
|
|
|
|
Admin State | Enable/Disable/No Change | ||
|
|
| |
Link Test | Enable/Disable | ||
|
|
| |
Speed Control | Auto Negotiate/10 Mbps/100 Mbps/ | ||
| No Change |
| |
Link Status Change Notify | Enabled/Disabled/No Change | ||
|
|
|
|
|
|
|
|