15
DRIVER INSTALLATION
FocusBT Connection Configuration
4. The final screen of the New Connection Wizard should indicate the virtual
Bluetooth Com port that was setup. This will usually be a high number, as
seen in the screen shot below. Remember this COM number for
application setup.
Click Next to Continue.
Figure 24.
5. After the FocusBT has been added to the connection list, right click on the
icon and select Connect in order to establish a link via Bluetooth technology
between the FocusBT and your computer.
The FocusBT should emit a connection tone and/or the blue light on the top
of the unit should stop blinking, indicating a connection has been
established.
Figure 25.