Metrologic Instruments MS5100

DISCONNECTING THE POWERLINK CABLE FROM THE SCANNER

Before removing the cable from the scanner, Metrologic recommends that the

power on the host system is off and the power supply has been disconnected

from the PowerLink cable.

1. Locate the small ‘pin-hole’ on the back of the scanner.

2. Bend an ordinary paperclip into the shape shown above.

3. Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.

4. You will hear a faint ‘click’. Pull gently on the strain-relief of the PowerLink

cable and it will slide out of the scanner.