Metrologic Instruments MS5100 S CANNER P

9
SCANNER PARTS
1. Green & Red LEDs
The MS5145’s laser pulses on and off when no bar code is presented, and
stays on when it senses a bar code. The green LED remains on during
normal pulse and scanning operation, and it blinks during power save mode.
On a successful read of a bar code, the red LED will flash and the scanner
will beep once. The LEDs are also used as diagnostic indicators and mode
indicators.
2. Output Window
Laser Light emits from this aperture.
3. PowerLink Cable
The 10-pin modular plug on the PowerLink cable connects into the 10-pin
modular jack on the MS5145.