34
Appendix C
Pin Assignments
Cable Pin Assignments for the Coil Cable
The MS6720 scanners are terminated to a 10 position shielded modular
connector. All of the coil cables (MLPN 44530) for the MS6720 scanner are
terminated the same. The difference between versions is the end of the cable
going into the scanner. This connector plugs into different “J” positions on
various computer/interface boards. Since each computer/interface board is
different, the output signals are different.
Version “9” (OCIA) Version “11” (46XX)
Pin Function Pin Function
1Power/Signal Ground 1Power/Signal Ground
2RDATA 2RS-232 Transmit Output
3RDATA Return 3RS-232 Receive Input
4Clock In 4RTS Output
5Clock In Return 5CTS Input
6Clock Out 6IBM 46XX Transmit
7Clock Out Return 7IBM 46XX Receive
8No Connection 8No Connection
9+5 VDC Power to Scanner 9+5 VDC Power to Scanner
10 OCIA Shield Ground 10 Shield Ground
Version “14” (232) Version “15” (LTPN)
PinFunction Pin Function
1Power/Signal Ground 1Power/Signal Ground
2RS-232 Transmit Output 2RS-232 Transmit Output
3RS-232 Receive Input 3RS-232 Receive Input
4RTS Output 4RTS Output
5CTS Input 5CTS Input
6DTR Input 6Light Pen Source +5V
7DSR Output 7Light Pen Data
8No Connection 8No Connection
9+5 VDC Power to Scanner 9+5 VDC Power to Scanner
10 Shield Ground 10 Shield Ground