8
Green and Red LEDs: During normal operation, the green
LED is on. This indicates that the laser is on and the unit is
ready to scan. On a successful read of a bar code, the red LED
will turn on. After communication to the host is complete, the
red LED will turn off. The LEDs are also used as diagnostic
indicators and mode indicators. Refer to pages 9-11 for details.
ú
Orbit Face: þ
Tilts 30 vertically
o
for variable position-
ing of the scan pattern.
Output Window: º
Laser light emits
from this aperture. ü
Cable Connection:
The MS7120 scanner
has a 10-pin modular
jack. The 10-pin
modular plug on the
PowerLink cable
connects into the
MS7120 jack. Refer to
pages 5-7 for specific
protocol PowerLink
cable connections.
Side View
Top View