Metrologic Instruments MS9500 Series

TAND

ITS

Assembly

There are two options for assembling the stand. The first option is a self-

supporting stand that can be moved freely about on the countertop. The second

option is used if the stand will be bolted or hard-mounted to the countertop.

Stand Option 1: Self-Supported Stand Kit #46-46128

Step 1

Slide the apron over the stand.

Figure 17.

Step 2

Position the stand so that it sits

under the tab on the apron.

Then secure the apron to the

stand using the two M3 x 6 mm

screws and the two #5 washers

provided.

Figure 18.

Stand Option 2: Hard-Mount Accessory Kit #46-46351

Step 1

Drill four #39 holes in the countertop.

Figure 19.

Step 2

Secure the base to the countertop with

the four #8 wood screws provided.

Figure 20.

Stand

ron

pron

Stand

M3 x 6 mm

Scre

#5 Washer

Tab

Base

#8 Wood

Screw

2.00