33
DEFAULT SETTINGS
Many functions of the scanner can be “configured” or enabled/disabled. The
scanner is shipped from the factory configured to a set of default conditions. All
default parameters of the scanner have an asterisk ( * ) marked in the default
column. If an asterisk is not in the default column then the default setting is off or
disabled. Every interface does not support every parameter. A check
mark (9) will appear in the interface column if it supports the parameter listed.
Parameter Default OCIA RS232 Light
Pen
IBM
46xx KBW USB Laser
Emulation
Normal Scan Mode *9 9 9 9 9 9 9
Continuous Scan Mode 9 9 9 9 9 9 9
Blinky Scan 9 9 9 9 9 9 9
Continuous Blinky Scan 9 9 9 9 9 9 9
Custom (one shot) Scan 9 9 9 9 9 9 9
Manual Activation Mode 9 9 9 9 9 9 9
Long-Range In-Stand *9 9 9 9 9 9 9
Short-Range In-Stand 9 9 9 9 9 9 9
Long-Range Out-of-Stand *9 9 9 9 9 9 9
Short-Range Out-of-Stand 9 9 9 9 9 9 9
CodeGate Active In-Stand 9 9 9 9 9 9 9
CodeGate Inactive In-Stand *9 9 9 9 9 9 9
CodeGate Active
Out-of Stand *9 9 9 9 9 9 9
CodeGate Inactive
Out-of Stand 9 9 9 9 9 9 9
UPC/EAN *9 9 9 9 9 9 9
Code 128 *9 9 9 9 9 9 9
Code 93 *9 9 9 9 9 9 9
Codabar *9 9 9 9 9 9 9
Interleaved 2 of 5 (ITF) *9 9 9 9 9 9 9
MOD 10 check on ITF 9 9 9 9 9 9 9
Code 11 9 9 9 9 9 9 9
Code 39 *9 9 9 9 9 9 9
Full ASCII Code 39 9 9 9 9 9 9 9