1.- Steps to link MS9530 Voyager RF with Base Station.
-Please read the following barcodes: 1º.-
Enter configuration
2º.- (*) Skip this step if you just want to change the link to another Base station.
Following parameters are set:
3º.-
4º.-
5º.-
Ready to read the new Serial number of Base Station to send data to.
Read Base Station serial number.
Exit Configuration
2.- MS9530 Voyager RF ID:
-Up to five units can work together with same Base Station. It is requested that each of them uses a different ID. Use this section to fix the desired ID.
