Information displayed in the camera’s viewer

Fig. 4: Exposure o.k.

The following table only gives a general survey. Camera-speciﬁc deviations ar possible (please refer to the camera’s operating instructions.

	blinks:	Indicates that ﬂashgun should be
		used or switched on (on some
		cameras).

	illuminated:	The ﬂash is ready for use (on some
		cameras) Please refer to your
		camera’s operating instructions to
		ﬁnd out if this applies to your came-
		ra model.

Image 9

Contents

Mecablitz 34 AF-3 C Dear Customer Foreword Contents Safety instructions Do not short-circuit batteries! Danger of ExplosionDo not dispose of spent batteries with domestic rubbish Power supply Preparing the mecablitz for useLoading and exchanging batteries Mounting/Removing the ﬂashgun Automatic ﬂashgun switch-off Setting the mecablitz into operation Features this functionSwitching the ﬂashgun on and off Flash-ready indication Flashgun instructions to the cameraAutomatic ﬂash sync speed control Correct-exposure indication see ﬁg Blinks Information displayed in the camera’s viewerCameras Ra model TTL ﬂash control Flash exposure storage Red „E-TTL indicator lights up on the mecablitz Flash synchronisation Normal synchronisationSecond curtain synchronisation Rear Flash in the individual camera modes Soft focusing SFUse of ﬂash in the program modes Depth of ﬁeld DEP AF red-light beam Autofocus measuring ﬂash Automatic ﬁll-in ﬂash Only the central AF sensor is supported Guiding edge Case gap Lighting and attachments Switch off the ﬂashgun with the main switch Care and maintenance TroubleshootingForming the ﬂash capacitor Manual ﬁring button Colour temperature approx K Synchronization Technical dataFlash duration Number of ﬂashes Flash recycling time Sticker can be applied to the back of the ﬂashgun Lighting distances