2. Preparing the mecablitz for use
☞When loading the batteries ensure correct pola- rity. Incorrectly loaded batteries can destroy the flashgun! All batteries must be of the same make and have the same charge level. Exhau- sted batteries must not be thrown into the dustbin! Contribute to the protection of the environment and discard exhausted batteries at the appropriate disposal points.
2.3Automatic flashgun switch-off
To avoid accidental battery discharge the flashgun automatically switches itself off to save power approximately 8 minutes after
-the flashgun was switched on
-the last flash was fired
-tripping the camera release, or
-switching on the camera light metering system. The green
To turn on the mecablitz again switch the main switch OFF and then ON. The flashgun should always be turned off if it is not being used.
2.4 Mounting/Removing the flashgun
Mounting:
•Turn off the mecablitz.
•Turn the clamping nut upwards against the case of the flashgun.
•Slide the mecablitz foot completely into the camera's accessory shoe.
•Turn the clamping nut downwards against the camera body, thereby securing the flash unit.
Removing:
•Switch off the flash unit before it is removed.
•Turn the clamping nut upwards against the case of the flashgun and remove the flash unit from the camera.
6
