Foreword

We congratulate you on purchasing this flash unit and thank you for your confidence in Metz products.

It is only natural that you should want to use your flash unit right away. However, we recommend that you study these Operating Instructions be- forehand to be able to fully exploit and utilize all the capabilities offered.

This flash unit is compatible with:

all cameras featuring a hot shoe contact.

all cameras that have an accessory shoe without hot shoe contact and use a sync cable (see Optional Extras).

system cameras.

Optimal adaptation to your camera is achieved by using an adapter of the SCA 3002 or SCA 300 system. The enclosed SCA Table will indicate the adapter you require for your particular camera. This table also indicates the special flash functions that can then be performed.

Please also open the back cover page with the illustrations.

1.Safety instructions

The flash unit is exclusively intended and approved for photographic use!

Never fire a flash in the vicinity of flammable gases or liquids (petrol, solvents, etc.)! DANGER OF EXPLOSION!

Never take flash shots of car, bus or train drivers, or of motorcycle and bicycle riders, whilst they are travelling. They could be blinded by the light and cause an accident!

Never fire a flash in the immediate vicinity of the eyes! Flash fired direct- ly in front of the eyes of a person or animal can damage the retina and lead to severe visual disorders - even blindness!

Only use the approved power sources listed in the Operating Instruc- tions!

Do not expose batteries to excessive heat, sunshine, fire and the like!

Never throw exhausted batteries on to a fire!

Exhausted batteries should be immediately removed from the flash unit. Lye leaking out of spent batteries will damage the unit.

Never recharge dry-cell batteries!

Do not expose the flash unit or battery charger to dripping or splashing water!

Protect the flash unit from excessive heat and humidity. Do not store the flash unit in the glove compartment of a car!

Never place material that is impervious to light in front of, or directly on, the reflector screen. The reflector screen must be perfectly clean when a flash is fired. The high energy of the flash light will burn the material or damage the reflector screen if this is not observed.

Do not touch the reflector screen after a series of flash shots. Danger of burns!

Never disassemble the flashgun! DANGER: HIGH VOLTAGE. There are no

components inside the flashgun that can be repaired by a layman.

￿

When taking a series of flash shots at full light output and fast recycling times as provided by NiCad battery operation, make sure to observe an interval of at least 10 minutes after 15 flashes, otherwise the flash unit will be overloaded.

The mecablitz may only be used in combination with a camera-inte- grated flash unit if the latter can completely be folded out.

Quick changes in temperature may cause condensation. Therefore give the flashgun time to acclimatize!

69

Page 3
Image 3
Metz 44 MZ-2 instruction manual Foreword, Safety instructions

44 MZ-2 specifications

The Metz 44 MZ-2 is a highly regarded flash unit that has found its place in the toolkit of both professional photographers and enthusiasts alike. Known for its versatility and advanced features, this flash unit has become a staple in the world of photography.

One of the standout characteristics of the Metz 44 MZ-2 is its powerful output capability, boasting a guide number of approximately 44 at ISO 100. This allows for effective illumination over considerable distances, making it an excellent choice for indoor and outdoor photography. The adjustable zoom head of the flash can adapt to different focal lengths, allowing for optimal illumination based on the photographer's needs. With zoom settings from 24mm to 105mm, it helps in controlling the spread of light depending on the lens being used.

The Metz MZ-2 is also recognized for its flexibility. It features a dual power source option, which includes both rechargeable batteries and AA batteries, making it convenient for photographers on the go. The quick recycling time is another highlight, allowing photographers to capture multiple shots in rapid succession without missing critical moments.

In terms of technology, the MZ-2 is equipped with advanced TTL metering capabilities compatible with a variety of camera brands. This feature automatically adjusts the flash output based on the camera's exposure settings, ensuring perfect exposure in different lighting conditions. Additionally, the flash supports multiple modes, including manual control and multi-flash settings, allowing for creative lighting techniques, such as stroboscopic photography.

The user-friendly interface of the Metz 44 MZ-2 enhances the overall experience. This flash unit boasts an intuitive control panel with a clear LCD display, making it easy to navigate through settings. Furthermore, the ergonomic design ensures a comfortable grip, which is vital during long shooting sessions.

Constructed with a sturdy build, the Metz 44 MZ-2 is designed to withstand the rigors of regular use. Its durable materials ensure longevity while maintaining a lightweight profile, which is advantageous for photographers who require mobility.

In summary, the Metz 44 MZ-2 is an advanced, powerful, and reliable flash unit that caters to a multitude of photographic needs. With features such as high guide number, adjustable zoom, TTL capabilities, fast recycling time, and dual power options, it continues to be a preferred choice among both amateurs and professionals seeking to enhance their photography with effective lighting solutions.