Preparing the mecablitz for use

3. Preparing the mecablitz for use

3.1 Attaching the mecablitz to the camera

☞Before mounting or removing the flash unit, switch off both the ca- mera and the mecablitz by their main switch.

The mecablitz can only be mounted on the camera with the standard foot 301 or an adapter of the SCA 300/SCA 3002 system (optional extra).

As standard, the mecablitz is fitted with the SCA 301 foot for simple flash synchronisation. The shutter speed must be the same or slower than the flash sync speed.

The “Set” version is supplied with the corresponding SCA adapter in place of the standard foot 301.

3.2 Mounting the standard foot or SCA adapter

☞Switch off the mecablitz by its main switch before mounting or re- moving the standard foot or SCA adapter!

•Hold the cover plate in the middle and withdraw (only when using the SCA 3002 adapter).

•Push the SCA adapter or the standard foot 301 all the way in.

3.3Removing the standard foot or SCA adapter

☞ Switch off the mecablitz by its main switch.

•Use your fingernail to press up the locking lever in the middle of the meca- blitz side and hold it depressed (when using an SCA 3002 adapter you must first open the flap on the rear of the adapter) and, ...

•at the same time, withdraw the SCA adapter or standard foot backward.

3.4 Mounting the mecablitz on the camera

☞Switch off the camera and the mecablitz by their main switch prior to mounting.

•Turn the locking nut of the SCA adapter or standard foot 301 against the mecablitz housing until the stop point is reached.

•Slide the mecablitz foot completely into the camera’s accessory shoe and lock into position with the locking nut.

3.5 Removing the mecablitz from the camera

☞Switch off the camera and the mecablitz by their main switch prior to removal.

•Turn the locking nut of the SCA adapter or standard foot 301 against the mecablitz housing until the stop point is reached.

•Withdraw the mecablitz with its foot backward from the camera’s acces- sory shoe.

3.6 Power supply 3.6.1 Suitable batteries

The mecablitz can be operated with any of the following batteries:

•4 NiCad batteries, type IEC KR 15/51 (KR6, size AA). They permit very fast recycling and are economical in use because they are rechargeable.

•4 nickel-metal-hydride batteries, type IEC HR6 (size AA). They have a sig-

nificantly higher capacity than NiCad batteries and are less harmful to the
environment (no cadmium).

•4 alkaline-manganese dry-cell batteries, type IEC LR6 (size AA/AM3). Maintenance-free power source for moderate power requirements.

•4 lithium batteries, type IEC FR6 L91 (size AA). Maintenance-free high- capacity power source with a low self-discharge rate.

☞Remove the batteries from the mecablitz if the flash unit is not going to be used for an extended period of time.

3.6.2 Replacing batteries (Fig. 1)

The batteries are exhausted if the recycling time (elapsing from the triggering of a full-power flash, e.g. in the M mode, to the moment the flash-ready indi- cator lights up again) exceeds 60 seconds.

•Switch off the mecablitz by its main switch.

•Slide the battery compartment cover in the direction of the arrow and fold open.

44 MZ-2 specifications

The Metz 44 MZ-2 is a highly regarded flash unit that has found its place in the toolkit of both professional photographers and enthusiasts alike. Known for its versatility and advanced features, this flash unit has become a staple in the world of photography.

One of the standout characteristics of the Metz 44 MZ-2 is its powerful output capability, boasting a guide number of approximately 44 at ISO 100. This allows for effective illumination over considerable distances, making it an excellent choice for indoor and outdoor photography. The adjustable zoom head of the flash can adapt to different focal lengths, allowing for optimal illumination based on the photographer's needs. With zoom settings from 24mm to 105mm, it helps in controlling the spread of light depending on the lens being used.

The Metz MZ-2 is also recognized for its flexibility. It features a dual power source option, which includes both rechargeable batteries and AA batteries, making it convenient for photographers on the go. The quick recycling time is another highlight, allowing photographers to capture multiple shots in rapid succession without missing critical moments.

In terms of technology, the MZ-2 is equipped with advanced TTL metering capabilities compatible with a variety of camera brands. This feature automatically adjusts the flash output based on the camera's exposure settings, ensuring perfect exposure in different lighting conditions. Additionally, the flash supports multiple modes, including manual control and multi-flash settings, allowing for creative lighting techniques, such as stroboscopic photography.

The user-friendly interface of the Metz 44 MZ-2 enhances the overall experience. This flash unit boasts an intuitive control panel with a clear LCD display, making it easy to navigate through settings. Furthermore, the ergonomic design ensures a comfortable grip, which is vital during long shooting sessions.

Constructed with a sturdy build, the Metz 44 MZ-2 is designed to withstand the rigors of regular use. Its durable materials ensure longevity while maintaining a lightweight profile, which is advantageous for photographers who require mobility.

In summary, the Metz 44 MZ-2 is an advanced, powerful, and reliable flash unit that caters to a multitude of photographic needs. With features such as high guide number, adjustable zoom, TTL capabilities, fast recycling time, and dual power options, it continues to be a preferred choice among both amateurs and professionals seeking to enhance their photography with effective lighting solutions.

Metz 44 MZ-2 instruction manual Preparing the mecablitz for use

Models: 44 MZ-2