ķ
60
Table 2: Guide numbers at maximum light output (Pag. 96)
Table 3: Distances in TTL flash mode (Pag. 97)
3. . . 16 Distance range without wide-angle diffuser
2. . . 11 Distance range with wide-angle diffuser
These table does not apply to bounced flash.
Battery charger 970
Input: 100 – 240 V (50-60 Hz) 0.6 A
Output: 4,8 – 9,6 V 0,8 A (charging current)
Battery pack 45-56
Rated voltage/capacity: 7.2V / 1650 mAh
Included
Flash unit, camera bracket, battery pack 45-56, charger, synch cable 45-47,
wide-angle diffuser 45-42, operating instructions.
17. Optional extras
Malfunctions and damage caused to the flash unit due to the use of
accessories from other manufacturers are not covered by our guaran-
tee.!
• Adapter of the system SCA 300
For flash operation with system cameras. See separate Operating
Instructions. Connecting cable SCA 300A (Order No. 0000930) or con-
necting cable SCA 3045 are additionally required.
• Adapter of the system SCA 3002
For flash operation with system cameras with digital data transmission of
the SCA functions. Extended functional features compared with the SCA
300 system. The SCA 3045 connecting cable is additionally required.
• Connecting cable SCA 3045 (Order No. 000304500)
Connects the flash unit to adapters of the systems SCA 3002 and SCA
300.
• Battery Holder 45-39 (Order No. 000045394)
For dry cell batteries.
• Filter set 45-32 (Order No. 000045327)
Consists of a set of 4 colour effect filters and 1 clear filter to hold any
coloured foil.
• B 46 charger set (Order No. 000129464)
NiMh battery and charger to convert the 45 CL-4 digital to NiMh battery
operation.
• Mecalux 11 (Order No. 0000011)
Sensor for optical, delay-free remote firing of slave flash units by a
camera-triggered flash. Responds also to infrared light beam. Does not
require batteries.
• Mecalux Holder 60-26 (Order No: 000060264)
To mount the Mecalux 11.
• NiMh battery 45-56 (Order No. 000045569)
for NiMh battery operation of the 45CL-4 digital
☞
704 47 0126.A5 45 CL-4 digi 01.02.2007 13:13 Uhr Seite 60