Metz Nordkap-S 70 Programme position, Management, Select programme position, Next programme

2. Programme selection	Programme position
	management

This TV set can manage up to 225 TV programme positions. If you are connected to a cable network or use a terrestrial aerial, you will not need all of these positions at the moment. If, however, you have a SAT upgrade kit installed, the number of programmes can increase drastically. We do not know how many programmes will be available in the future. For this reason, we have provided plenty of programme positions in reserve. For selection of the desired programme position, we have invented a simple input method which saves you having to enter three digits for each position.

The first digit you enter is normally the hundreds digit. If, however, you have less than 100 programmes stored, this digit auto- matically moves to the tens position. If you have less than ten programmes stored, it moves to the units position.

Example: you have stored programmes in positions 1 to 35 and you want to select position 3. Press the keys and or simply and confirm with OK . Programme position 4 can be selected by simply entering , since there are no programme positions higher than 39. Further examples are shown in the following text.

Press this key on the remote

control....

1.Select programme position

2 (only the first 9 programme positions in the station table are occupied)

2

2.Select programme position 25 (only the first 99 pro- gramme positions in the station table are occupied)

2 5

The screen displays

Pr 2 MONO

ZDF 18:15:33

Pr 25 MONO

S-RTL18:15:48

Explanation

Only the programme positions 0-9 in the station table may be occupied if a programme is to be selected by pressing one numeric key.

Pressing the numeric key opens a time-delay win- dow* which waits for 3 seconds for the input of further digits. If no further numeric key is pressed, the TV set switches to the programme position selected with the first digit.

*The operating mode of this time delay window can be changed: see page 18, item 5, „PC time out“.

Only the programme positions 0-99 in the station table may be occupied if a programme is to be selected by pressing two numeric keys.

After a programme has been selected successfully, a box containing the programme position number, the time and the current sound mode (e.g. stereo) is displayed on the screen.

To select a programme position with only a single-digit

number, you must enter			before the related digit,
e.g.	and	; alternatively, you can press		and
then press		OK .

3. Select programme position

101 (more than 100 pro-

gramme positions in the

station table are occupied)

1 0 1

4. Next programme

P+

P-

Pr 101 MONO

Nord3 18:15:48

Pr 3 MONO

Bayern 3 18:15:48

ZDF

BR3

RTL

SAT1

RTL2

PRO7

EUSPO NTV NORD3 MDR3 SWF3

In this case, more than 100 programme positions in the station table are occupied, which means that you have to press three numeric keys.

After a programme has been selected successfully, a box containing the programme position number, the time and the current sound mode (e.g. stereo) is displayed on the screen.

To select a programme positions with a single-digit or

two-digit	number,	you must	enter	before the
related digit(s), e.g.		and	; alternatively, you
can press	and then press OK .

You can step sequentially through the programme

positions with the P+ P- keys. If either of these keys is held down for more than two seconds, a programme box for selection of the desired programme is displayed on the screen. Release the P+ or P- key as soon as the desired logo is highlighted in white: this programme position will then be selected.

6