Metz Nordkap-S 70 Adjust the colour offset or contrast, Change the picture format Green

6.1 Correcting picture deviations

Press this key on the remote

control....

5.Adjust the colour offset or contrast

	yellow
	or
	white
-	+

6. Change the picture format

	green
-	+

The screen displays

MENU return TV picture ? Help

TV station table

	Programme		Pict.	Sound	Std
	▲▼
0	LOGIC		—	—	Auto.
1	ARD		—	—	Auto.
2	ZDF		—	—	Auto.
3	SAT 1		—	—	Auto.
4		Chrom. adjustm.			00 Auto.
5		Col. offset adj.			0 Auto.
6		Contrast adj.			00 Auto.
7	AV	Picture format			Auto.
8				4:3 Auto.
9		VCR		Off Auto.
	<< weitere Einstellungen
		Logo, Channel, Signal
6 9 6 + 0 6 H - G B				store ?
				OK

MENU return TV picture ? Help

TV station table

	Programme		Pict.	Sound	Std
	▲▼
0	LOGIC		—	—	Auto.
1	ARD		—	—	Auto.
2	ZDF		—	—	Auto.
3	SAT 1		—	—	Auto.
4		Chrom. adjustm.			00 Auto.
5		Col. offset adj.			0 Auto.
6		Contrast adj.			00 Auto.
7	AV	Picture format			Auto.
8				4:3 Auto.
9		VCR		Off Auto.
	<< weitere Einstellungen
		Logo, Channel, Signal
6 9 6 + 0 6 I - G B				store ?
				OK

Explanation

Normally, it is not necessary to adjust the colour offset.

However, if external units are connected it is possible that colour and black-and-white pictures are not accurately superimposed. A similar effect is sometimes encountered in journals when the black-and-white and colour impressions do not register, with the result that the contours are blurred. The colour offset adjustment has no effect on an RGB input.

The contrast adjustment range is -15 to +15.

If no other values are to be changed, then press the OK key to store the new settings.

The picture format of a normal TV set is 4:3. If an input signal in 16:9 format is applied to the EURO socket, the picture format is changed automatically. If a 16:9 input signal is applied to the phono (cinch) sockets or the mini-DIN (YC) socket, the picture format must be changed manually.

An external switching voltage of 4-7 V at the EURO socket automatically switches the TV to 16:9 format, provided that the signal type was stored under the heading „...controls AV operation“ in the menu „Equipm. configuration, device connection“.

7.Store all settings and return to TV picture

OK

TV

21