Meyer 62517, 62505 Optional HOLD-DOWN KIT, Installation Instructions, Part Number QTY Description

OPTIONAL HOLD-DOWN KIT

Part No. 62562 (00002-306-00)

ITEM	PART NUMBER		QTY.	DESCRIPTION
1	62602	04068-038-00	4	Ratchet/Strap
2	62807	04048-504-02	4	Bolt, 1/2” Eye
3	20307	04003-804-06	4	Locknut, 1/2-13 Esna ZP
4	62604	04003-801-11	4	Nut, 1/2-13 Hex ZP
5	62605	04004-002-16	8	Flatwasher, 3/4"

INSTALLATION INSTRUCTIONS

CAUTION

READ ALL THE INSTALLATION INSTRUCTIONS BEFORE STARTING

Before starting, verify that this mounting is acceptable to the vehicle manufacturer.

Attach the hold down at each corner of hopper as shown. Locate and drill four .531 (17/32”) diameter holes for eye-bolts in the truck bed (position may vary from that shown). Straps must be positioned at opposing angles so that spreader cannot slide forward or rearward. Mount eye-bolts as shown, with locknuts and flatwashers on the bottom side. Assemble ratchet/strap to eye-bolts. Tighten hold downs evenly. Do not over tighten damage will result to the spreader or the truck.

1

2

4

5

4