Throttle

OPERATION

WARNING

BEFORE OPERATING THE CONTROL PANEL - MAKE SURE THAT NO ONE IS INSIDE

THE HOPPER OR NEAR THE SPINNER.

1.Manual Throttle: All gasoline engine models come with a control panel. If your spreader is a manual

throttle model, look at your control panel. It will have (3) controls

mounted on it. The one on the far left is the start button. The right toggle is the electric clutch control. When the switch is in the “OFF” position, the electric clutch is disengaged

and the conveyor and spinner will stop. In the “ON” position, conveyor and spinner will operate. The

middle control is the throttle. Your engine is equipped with a semi- automatic choke. To activate the choke, pull the throttle cable all the way out. To remove the choke function when engine us warm, push throttle cable in, to desired engine RPM.