Toshiba 3511 manual 210, Error Code Message Corrective Action

12.ERROR CODE (Cont.)

	Error Code	Message	Corrective Action
	2C65, 2C66,	Failed to connect to SMTP server	Make sure the SMTP server is correctly
	2C69		working, or the SMTP server address has
			been set correctly. Then retry the scan.
	2C67, 2C68	Failed to send E-Mail message	Turn the power OFF and then back ON. Retry
	2C6A		the scan. If the error still occurs, contact your
			service representative.
	2C6B	Invalid address specified in From: field	Make sure that there is an illegal character in
			the Terminal mail address. Delete the illegal
			character and reset the appropriate Terminal
			mail address, then retry it.
	2C6C	Invalid address specified in To: field	Make sure that there is an illegal character in
			the Destination mail address. Delete the
			illegal character and reset the appropriate
			Destination mail address, then retry it.
	2C6D	NIC system error	Contact your dealer for support.
	2C70	SMTP service is not available	Ask your administrator whether the SMTP
			service is enabled.
	2C80	Failed to process received E-mail job	Ask your administrator to confirm whether the
			Received Internet Fax Forward is set.
	2C81	Failed to process received Fax job	Ask your administrator to confirm whether the
			Received Fax Forward is set.
9
	2CC0	Job canceled	(Job was canceled.)
	2CC1	Power failure occurred	Make sure that the power cable is connected
			properly and it is inserted securely. Resend
			the job.
	Save as file
	2D10, 2D12,	Illegal Job status	Turn the power OFF and then back ON. Retry
	2D13,		sending. If the error still occurs, contact your
	2D20-2D22		service representative.
	2D11	Not enough memory	Make sure there are enough memory to save
			the scan job.
	2D14, 2D61	Invalid parameter specified	Make sure you specify the settings correctly
			and try again.
	2D15, 2D65	There are too many documents in the	Delete the data in the local shared folder in the
		folder. Failed in creating new document.	equipment and retry the scan.
	2D30	Failed to create directory	Make sure that the access privilege to the
			storage directory is writable and the server or
			local disk has a sufficient space. Then retry
			the scan.

210 9.JOB STATUS