Toshiba 3511 manual Place the next original, and press the Start button

5 Place the next original, and press the [START] button.

- Set the first page of your originals first.

- You can also press the [YES] button to perform the same2 operation.

- Repeat this step for the subsequent originals.

6 Once the final original has been scanned, press the [FINISHED] button.

- Copying starts. The paper exits with its copied side down.

When Coming Across the Situations below

To make multiple sets of copies:

-Key in the copy quantity.

-To correct the input copy quantity, press the [CLEAR] button.

-Raise the stopper as required.

If the paper runs out in the middle of copying:

- The [JOB STATUS] button flashes. Press this button to check which drawer is flashing and add paper.

To stop a copy operation:

"6.STOPPING THE COPY OPERATION" Page 59

When “Wait” appears:

The copier may automatically go into the adjustment mode. It will soon start working. Do not turn OFF the power. Just wait for a while.

55