Toshiba 3511 manual Hole Punch Mode Optional

Hole Punch Mode (Optional)

When the optional hole punch unit is attached to the finisher (Optional: MJ-1024, MJ-1023), you can hole punch your copies.

*The paper weight should be in the range of 17 lb. Bond to 110 lb. Index. Special paper such as OHP files or labels is excluded.

1	Place paper in the drawer(s).		3
	- "1.SETTING COPY PAPER"	Page 38
	- When using this mode in bypass copying ("Bypass Copying"
	Page 60), be sure to specify the paper size.
2	Place the original(s).
	- "2.SETTING ORIGINALS"	Page 47
3	Press the Finisher button on the basic
	menu as shown in the illustration on the

right (highlighted).

4

5

Press the [HOLE PUNCH] button.

zSelect other copy modes as required.

Press the [START] button.

Available paper sizes for the hole punch:

Since the number of punch holes and the distance between the holes vary depending on the country, purchase a hole punch unit that meets your requirements. (For details, consult your service technician.)

	Number of punch holes and hole	Available paper size
	diameter
North America	2/3 holes switchable	2 holes: LG, LT-R, A4-R
(MJ-6004N)	(0.315” dia.)	3 holes: LD, LT, A3, A4

*The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject to change without notice in the interest of product improvement

87