Toshiba 3511 manual Adjust the side guides with both hands

4	While pushing the size selection lever in
	the direction of the arrow, set the side
	guide to the desired paper size (indicated	2
	on the bottom inner surface of the
	drawer).
	- Adjust the side guides with both hands.

5 Push the arrow part (left side) to lock the size selection lever.

6 Place paper in the drawer(s).

-Place paper face up.

-Maximum number of sheets that can be set. "Acceptable Copy

Paper Types and Sizes" Page 38

-Fan the paper well before placing it in the drawer.

-Do not add paper above the line indicated on the guide.

-Do not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of approx. 0.02” (less than 0.04” in total) is left between the paper and the side guide. If there is no gap, this could cause paper misfeeding.

7 Push the drawer straight into the copier until it comes to a stop.

- Be sure to push the drawer fully in.

0.5mm

(0.02’’)

Be careful not to let your fingers be caught when closing the drawer. This could injure you.

41