Toshiba 3511 manual 282, Return the saddle staple to its original, Position

11 Close the front cover of the finisher. Then test stapling is automatically performed on a blank sheet.

- This is performed to avoid empty stitching.

If there is a test stapling failure and “Check staple cartridge” remains, repeat the above procedure from step 1 to 11.

12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL

9 Return the saddle stitch unit to its original position.

10Make sure that LD, LG or LT-R paper is set.

7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)

8	Return the saddle staple to its original
	position.
	- Pull the handle of the saddle stitch holder (1) toward you and turn
	it (2) 90º in the direction of the arrow.
	(2)
	(1)

-If any of the above paper sizes is not set, test stapling cannot be performed.

12

282