CHAPTER 5: QUICKFLY RIGGING
36

FLOOR- AND POLE-MOUNTING MINAS WITH

THE MYA-MINA

Up to two MINA loudspeakers can be floor- or pole-
mounted with the MUB-MINA mounting yoke. For floor- and
pole-mounted applications, the MUB-MINA can be oriented
for either maximum downtilt (with the slot near the rear of
the loudspeakers) or maximum uptilt (with the slot near the
front of the loudspeakers).
■For a single floor- or pole-mounted cabinet, the
MUB-MINA supports continuos angles from +10 to –10
degrees in the maximum downtilt orientation, and angles
of 0 to +20 degrees in the maximum uptilt orientation.
■For multiple floor- or pole-mounted cabinets, the
MUB-MINA supports fixed angles of 0, +5, and +10
degrees (with either orientation).
CAUTION: When mounting the MUB-MINA on
a pole, make sure the pole and pole-mount
adapter have been rated to support the full weight of
the U-bracket and loudspeakers. Observe all safety
precautions specified by the pole and pole-mount
adapter manufacturer.
NOTE: For illustrations showing which
MUB-MINA mounting holes and slot configura-
tions to use to achieve specific angles, refer to the
MG-MINA Assembly Guide (PN 05.207.101.01) avail-
able at www.meyersound.com.

MCF-MINA CASTER FRAME

The MCF-MINA caster frame safely supports up to five
MINAs for transport and groundstacking, making it easy to
assemble or disassemble arrays. The caster frame’s sturdy
construction allows it be conveniently moved with forklifts.
NOTE: For complete information on the
MCF-MINA, as well as for other rigging acces-
sories, refer to the MG-MINA Assembly Guide
(PN 05.207.101.01) available at www.meyer-
sound.com.
The MINA at the bottom of the stack attaches securely to
the caster frame with its GuideALinks and is secured with
the four (1/4 by 0.90-inch) quick-release pins included with
the caster frame. The configuration of the GuideALinks for
the attached MINA determines its tilt, which can be from
+6 degrees (uptilt) to –5 degrees (downtilt).
CAUTION: Always use the quick-release pins
included with the MCF-MINA caster frame to
secure groundstacked MINAs to the grid. Do not use
the quick-release pins included with MINA in the
frame as they are shorter and will not lock in place.
Pole-Mounted MUB-MINA with Two MINAs
!
MCF-MINA Caster Frame
!