2. Installation
2.1 Setup
Position of the jumper for network-parameter selection 6 :
1 | Personalised network parameters | |
2 | ||
(default position) | ||
3 | ||
|
1
2
The SNMP communication card may be installed in either:
◗A UPS (see figure 1).
◗A MultiSlot module (see figure 2).
The front of the card must be secured to the device frame using the two screws provided. It is not necessary to de- energise the device before inserting the card.
Figure 1: example of an installation in a UPS
UPS |
Figure 2: example of an installation in a MultiSlot module
MultiSlot |
|
UPS |
|
| |
| Us/Out/Ausg |
| 1 |
10A/250V |
|
| 2 |
Ue/In/Eing | I max 3.4A |
Page 6 - 51029486EN/AA
