Micro Technic 81781, 81791 user manual Maintenance, To keep your sensor pads in good condition

Maintenance

To keep your Informer-Mate™control unit in good condition:

•Do not immerse the control unit in liquid of any type. The control unit will not operate properly if exposed to excessive liquids. If the control unit is immersed in liquid, discard it immediately.

•Gently clean the Informer-Mate™control unit with non-caustic cleaning agents.

•Test your Informer-Mate™control unit and sensor pad before each use and inspect the cords, controls and sensor pads for signs of damage. Replace any components with signs of wear or damage immediately. Never use equipment that has been damaged.

•Call your distributor or Micro-Tech at 800-206-1045 to order replacement parts.

To keep your sensor pads in good condition:

•Do not immerse the pressure pad in liquid of any type. The pressure pads will not operate properly if exposed to excessive liquids. If the pad is immersed in liquid, discard it immediately.

•Clean soiled areas of sensor pad with a clean cloth and water or a vinyl-tolerant solution.

•Keep the pressure pad flat at all times. Folding the pad will damage it. Do not use the pad if it has been folded.

•Call your distributor or Micro-Tech at 800-206-1045 to order replacement parts.

6