Changing Print Quality
To change the Print Quality, click the Advanced button on the Print screen. Select the Media type/Quality option from the list circled to the right. The settings to the right will appear.
You can select either Photo or Graphics and Text as the Media Type. Photo will take longer to print and will use more ink, but the quality will be higher. Graphics and Text, on the other hand, has a lower quality but will print in less time with less ink used.
You can also choose between Draft (Graphics and Text only), Normal, Best, and Maximum dpi (Photo only) from the Quality list. The choices are listed in order of lowest to highest quality and ink usage.
Color can be selected as ColorSmart/sRGB,
ColorSync, or Grayscale.
Changing Print Diameters
Different media types and brands may vary in the size of the printable surface. When the print surface changes, you will need to set the printer to the correct sizes.
Always make sure the images are printing centered on the disc before changing the diameter settings. If the image is not centered, please refer to page 10 for infomration on the alignment process.
To change the diameter of the printed area, click the Advanced button on the Print screen. Select the Disc Printing option from the list circled to the right. The settings to the right will appear.
The Outer setting will change how closely to the edge of the disc the image will print. Increase the Outer setting to leave less unprinted area at the outer edge. Decrease the Outer setting to leave more unprinted area at the outer edge..
The Inner setting will change how closely to the center of the disc the image will print. Decrease the Inner setting to leave less unprinted area at the center. Increase the Inner setting to leave more unprinted area at the center.
You should never have the printer attempting to print off the printable surface. This will leave unabsorbed ink on the disc.
14 • Using the
