Loading Discs
The next step is to load your
Figure 1 | Figure 2 |
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, against the wide input rod, as seen in figure 2.
The
Front Panel Indicators and Buttons
1. Power | 2. Network (unused) | 3. Cancel | 4. Media Feed | 5. Print head |
|
|
|
| LEDs |
1.Power Button and LED – The Power button turns the
NOTE: The AC power switch located on the back of the
2.Network Button - This button is unused.
3.Cancel Button – Pressing the Cancel button cancels the current print job.
4.Media Feed Button – Pressing this button will clear any media feed issues. This button has an LED that will flash amber when a media feed issue is occurring. It will also show a steady amber if either the ink or the upper doors are opened.
5.Print Head LEDs – These LEDs will be on if there is an issue with either of the print heads.
8 • Assembly and Installation
