MicroNet Technology SP2515 SERIES manual Specifications

<Cable Connection> test reminds you that the connection link might be fail, either the cable is not connected or the cable link fails.

For the <Run Diagnostics on Network> test, it is necessary to connect your computer with its supporting hub or another computer. This is a "Ping-Pong" test. This test cannot be completed except two computers on the LAN for sending or receiving the test packets between computers.

For the <Run Diagnostics On Network> test

Ethernet Address	Ethernet Address
00E07DC00002	00E07DC00001
Target Machine	Master Machine

	Network
2.7 Specifications
Standards	IEEE 802.3u 100BASE-FX
	PCI Specifications Revision 2.1
Speed	200Mbps full-duplex
	100Mbps half-duplex
Performance	148,800pps for 100Mbps
Fiber Cable	62/125µm multi-mode fiber-optic
	cable, up to 2 km
Wavelength	1300nm
LED Indicators	LNK (Link) /ACT (Activity)
Dimensions	136 mm × 89 mm
Net Weight	90g approx.
Power Consumption	5VDC, 500mA max.
Operating Temperature	0°C to 40° C (32°F to 104°F)
Storage Temperature	-25°C to 70°C (-13°F to 158°F)
Humidity	10%-90% non-condensing