Micronics M5Pi System Board Manual
Installing an ISA Peripheral Card
Micronics ISA slots accommodate all standard ISA peripherals. Complete the following steps to install an ISA card:
1.Turn the computer system off and remove the computer cover.
2.Choose an unused ISA slot and remove the slot cover.
3.Insert the card with the bottom edge level to the slot. Never insert the card at an angle!
4.Carefully push the card straight down, making sure the card is fully inserted.
5.Replace the screw which holds the card into place.
6.Replace the computer cover.
7.Read the card’s manual for additional instructions concerning installation and software drivers.
Figure