APOST Messages

The following table lists the Power On Self Test (POST) messages, possible causes, and solutions.

MessagePossible CauseSolution

 

 

 

NO DISKETTE

Disk controller not

Change the

CONTROLLER

found.

Configuration.

DISKETTE DRIVE

Disk adapter has failed

Check the disk adapter.

RESET FAILED

or is improperly

 

 

configured.

 

DISKETTE DRIVE A

Drive A failed or is

Check the A drive.

FAILURE

missing.

 

 

 

 

DISKETTE DRIVE B

Drive B failed or is

Check the B drive.

FAILURE

missing.

 

 

 

 

 

 

DISKETTE READ

Disk is not formatted or

Replace the diskette with

FAILURE; STRIKE

is defective.

a formatted diskette and

F1 TO RETRY

 

retry.

BOOT

 

 

DISPLAY ADAPTER

The color/monochrome

Change the switch to the

FAILED USING

switch is not set

correct setting, or check

ALTERNATE

correctly, or the primary

the primary video

 

 

video adapter failed.

adapter.

 

 

 

ERRORS FOUND;

Hard disk configuration

Rerun SETUP and enter

DISK X FAILED

information is incorrect.

the correct hard disk

INITIALIZATION

 

information.

 

 

 

 

 

ERRORS FOUND;

The size of the base or

Enter correct memory

INCORRECT

the expansion memory,

size and rerun SETUP

CONFIGURATION

does not agree with

procedure.

INFORMATION;

configuration

 

MEMORY SIZE

information.

 

MISCOMPARE

 

 

 

 

 

A-1