3.Network Functions
3.1Configuring and controlling the projector via a web browser (continued)
3.1.6 Alert Settings
Displays and configures failure & alert settings.
Alert Item | Description | ||
|
| ||
Cover Error | The lamp cover has not been properly fixed. | ||
Fan Error | The cooling fan is not operating. | ||
Lamp Error | The lamp does not light, and there is a possibility that interior | ||
portion has become heated. |
| ||
|
| ||
Temp Error | There is a possibility that the interior portion has become | ||
heated. |
| ||
|
| ||
Air Flow Error | The internal temperature is rising. | ||
Cold Error | There is a possibility that the interior portion has become | ||
overcooled. |
| ||
|
| ||
Filter Error | Filter time over. |
| |
Other Error | Other error. |
| |
If displaying this error, please contact your dealer. | |||
| |||
Schedule Execution | Schedule Execution error. ( | 22) | |
Error | |||
|
| ||
Lamp Time Alarm | Lamp time over Alarm Time setting. | ||
Filter Time Alarm | Filter time over Alarm Time setting. | ||
Transition Detector | Transition Detector Alarm. ( | OPTION menu in the User’s | |
Alarm | Manual – Operating Guide) |
|
•If STANDBY MODE is set to NORMAL, the projector's power status changes from off to standby state.
Cold Start | • If STANDBY MODE is set to SAVING, the projector's power | |
| status changes from standby state to on (the lamp is turned on). | |
| ( SETUP menu in the User’s Manual – Operating Guide) | |
Authentication Failure | The SNMP access is detected from the invalid SNMP | |
community. | ||
|
Refer to “Troubleshooting” in the User’s Manual – Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error.
20