18
3. Network Functions
3.1 Configuring and controlling the projector via a web browser (continued)
Item Description
SNMP Port Configures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address
Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network Settings.
The maximum length of host or domain name is up to 255
characters.
SMTP Port Configures the SMTP port.
Port open Click the [Enable] check box to use the e-mail function.
Network Bridge Port Configures the Bridge port number.
Port Number
Input the port number.
Except for 9715, 9716, 9719, 4352 between 1024 and 65535
can be set up. It is set to 9717 as the default setting.
Click [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
NOTE