Microsoft 28 PXP43 Motherboard User’s Guide, Advanced Setup, Using BIOS, TM Status TM1/TM2

Models: PXP43

1 46
Download 46 pages 37.72 Kb
Page 32
Image 32
28PXP43 Motherboard User’s Guide

28PXP43 Motherboard User’s Guide

Advanced Setup

This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer.

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

Advanced Setup

Thermal Management

 

 

Enabled

TM Status

TM1/TM2

 

Limit CPUID MaxVal

Disabled

Enhanced Halt (C1E)

Enabled

Intel XD Bit

Disabled

Intel EIST

Disabled

Intel Virtualization Technol

Enabled

Quick Power on Self Test

Enabled

Boot Up Numlock Status

ON

APIC Mode

Enabled

1st Boot Device

CD/DVD

2nd Boot Device

Hard Drive

3rd Boot Device

Remvable Dev.

Boot Other Device

Yes

Help Item

For the processor its CPUID belows 0F41h. TM2 only can be enbale under below setting.

1. Freq.>=3.6GHz FSB800

2. Freq.>=2.8GHz FSB533

 

 

 

 

mn< >

:Move Enter : Select

+/-/: Value

F10: Save ESC: Exit

 

F1: General Help

F9: Load Default settings

Thermal Management (Enabled)

This item displays CPU temperature and enables you to set a safe temperature to Prescott CPU.

TM Status (TM1/TM2)

This item displays CPU Monitor status.

Limit CPUID MaxVal (Disabled)

Use this item to enable or disable the Max CPU ID value limit. When suppports Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting” when trying to install Windows NT 4.0.

Enhanced Halt (C1E) (Enabled)

This item enables or disables enhanced halt.

Intel XD Bit (Disabled)

This item enables or disables the Intel XD Bit technology.

Intel EIST (Disabled)

This item allows users to enable or disable the EIST (Enhanced Intel Speedstep Technology) function. This item shows only if the CPU supports EIST.

Intel Virtualization Technol (Enabled)

When enabled, a VMM can utilize the additional hardware capabilities provided by Vandor Pool Technology.

Quick Power on Self Test (Enabled)

Enable this item to shorten the power on testing (POST) and have your system start up faster. You might like to enable this item after you are confident that your system hardware is operating smoothly.

Using BIOS

Page 32
Image 32
Microsoft 28 PXP43 Motherboard User’s Guide, Advanced Setup, Using BIOS, Thermal Management Enabled, TM Status TM1/TM2