Microsoft TM--1104-3

Rev. P. Dokument N Signature Data ТЭ3.623.912-03РЭ ТЭ3.623.912-03РЭ Rev. P. Dokument N Signature Data

Size А3 /А4

Signature and Data

Invent N of doubl

Subst. of invent N

Signature and Data

Invent N of orig.

Fig. 1 – Front panel of the ЭМ-1212-1 control module.

Functioning of the ЭМ-1212-1 control module as a part of the control system is

provided by microcontroller CS, PLIC, interface and buttons with LEDs. The microcontroller

(MC) together with the PLIC inquires the buttons. On request from the ЭМ-1209-1 controller

the MC forms a reply array with the codes of the buttons pressed and transfers it via the

RCLI channel to the ЭМ-1209-1 controller.

The MC of CS receives from the ЭМ-1209-1 controller a command array with

instructions for lighting up the LEDs and switches on the corresponding LEDs by means of

the PLIC. The working program of the ЭМ-1209-1 controller analyses the button state and

decides whether to light up the LEDs.

Correspondence between group numbers, channel numbers, TVD installation places

and the designation on the ТМ-1215-4 control module is shown in Table 2.

The ЭМ-1211 diagnostics module has a microprocessor and an interface receiving

arrays with data on the CS state from the ЭМ-1209-1 controller and provide visualization of

the data in video frames of the ACS.

The ЭМ-1204-1 videoswitch module contains a MC and an interface that receive

instructions from the ЭМ-1209-1 controller for commutation of video signals and control their

execution.

Table 2

Group-

channel Place of TVD installation Video signal

source

Designation on

ТМ-1215-4

1-1 Device ″Сигнал-3″ КТ-257 PERISCOPE

1-2 Fore end, − 6 frame ТМ-1220-1 FE –6FR

1-3 1 room, 1 deck, starboard side Неотон-08-2 1R 1D STB

1-4 1 room, 2 deck Неотон-08-1 1R 2D

2-1 1 room, 1 deck, port side Неотон-08-1 1R 1D PS

2-2 Superstructure, 20 frame ТМ-1220-1 SUPRSTR 20FR

2-3 3 room, 1 deck Неотон-08-2 3R 1D

2-4 3 room, 3 deck Неотон-08 3R 3D

3-1 4 room, 1 deck Неотон-08-2 4R 1D

3-2 BF, winch automated communication

system ТМ-1220-1 WINCH ACS

3-3 4 room, 2 deck, starboard Неотон-08-1 4R 2D STB

3-4 4 room, 2 deck, port side Неотон-08-1 4R 2D PS

4-1 5 room, port side Неотон-08-2 5R PS

4-2 5 room, starboard Неотон-08-2 5R STB

4-3 Pod, winch sonar system ТМ-1220-1 WINCH SS

4-4 4 room, 2 deck, PCS Неотон-08 4R 2D PCS

5-1 6 room, 1 deck, aft Неотон-08-1 6R 1D A

5-2 6 room, 1 deck, fore Неотон-08-1 6R 1D F

5-3 Tiller compartment Неотон-08 TC

5-4 Pod, 108 frame ТМ-1220-1 POD 108FR

ЭМ-1212-1

TROUBLE

GROUP CHANNEL TVD CONTROL TROUBLE

ЭМ-1204-1 ТМ-1304 N1

ЭМ-1205-1 ТМ-1304 N2

ЭМ-1209-1 ТМ-1304 N3

ЭМ-1242 ТМ-1304 N4

ЭМ-1213 N1 ТМ-1304 N5

ЭМ-1213 N2

ЭМ-1213 N3 ТМ-1215-4 N1

ТМ-1215-4 N2

ТМ-1215-4 N3

OFF

The ЭМ-1242 interface unit contains a MC and a PLIC that form an array with

chronometrical data on request from the ЭМ-1209-1 controller.

The ЭМ-1209-1 controller working program provides various priorities for the

ЭМ-1212-1 and ТМ-1215-4 control modules as per enabling and control of the TVDs. The

ЭМ-1212-1 control module has the highest control priority. The second comes the

ТМ-1215-4 No.1 control module, then - the ТМ-1215-4 No.2 control module and

ТМ-1215-4 No.3 control module.

The ЭМ-1209-1 prohibits accidental enabling the night channel of the KT-257

TV-camera in the day time. On the first press on button PERISCOPE NIGHT on any of the

ТМ-1215-4 control modules, the ЭМ-1209-1 controller will switch on the day channel of the

ТМ-1213

МТК-110МЭ ДЕ-118-1

FUSE

NIGHT

MODE

TEST

TVD TO

CHECK

4 TVD

FROM CHECK

TEST ЭМ-1212-1

P. P.